Factory-Reconditioned Dremel 6300-02L-RT 120-Volt Multi-Max Oscillating Kit Reviews
Brand:Dremel
Model : 6300-02LR
Rating :
List Price :
$144.26 Not Sell on this Price!
Offer Price :
See Low Price
Factory-Reconditioned Dremel 6300-02L-RT 120-Volt Multi-Max Oscillating Kit Review
I recently started a remodel project and needed to remove large sections of drywall, caulking, and even needed to remove sections of PVC. This tool made all of those jobs quick and easy. It allowed for me to get into smaller areas than traditional methods would have. I also had to pull up laminate flooring and the rigid scraper eat away at it like it was thin paper. I love this tool and would definitely recommend this tool.
Rockwell RW9113 Sonicrafter Scraper Blade Reviews
Brand:Rockwell
Model : RW9113
Rating :
List Price :
$11.99 Not Sell on this Price!
Offer Price :
See Low Price
Rockwell RW9113 Sonicrafter Scraper Blade Review
I first tried the scraper on the glue spots on a concrete floor where w/w carpet had been laid, before putting down hardwood. On the really old and dried glue from earlier carpeting, it was great. For the spots where pieces of the rubber padding had adhered, it was OK, lifting off most of the remaining pad, but for the more recent glue spots alone it heated up the glue and made it even stickier. Then I used it to take off caulking where the baseboard was installed and it was terrific - when I tried to take the same stuff off with a chisel, it was very tough. The Sonicrafter made this chore a breeze! It also worked great on removing mirror mastic on a wall. I do agree with the other reviewer about it being aggressive - it will cut into wood or sheetrock quickly if you're not careful.
Rockwell RW9122.3 Sonicrafter 1-3/8-Inch Universal End Cut Blade, 3-Piece Reviews
Brand:Rockwell
Model : RW9122.3
Rating :
List Price :
$39.98 Not Sell on this Price!
Offer Price :
See Low Price
Rockwell RW9122.3 Sonicrafter 1-3/8-Inch Universal End Cut Blade, 3-Piece Review
I ordered the 3 blade pack when I ordered my Rockwell Sonicrafter after reading reviews about the short cutting life these blades seem to have. I'm still on my original blade after 21 plunge cuts into 1 1/2 x 1 1/2 inch pressure treated pine with concrete behind it (i.e. the blade often contacted the concrete), 3 cuts through 3/4 inch flex copper tubing, and 4 cuts though 5/8 inch PT door frames over concrete. The blade is finally showing signs of laboring through a cut. I probably could have used other tools to make these cuts, but it would have been a hassle, been messier, and taken much more time than with the Sonicrafter. If I don't ever use this machine again, it will have been worth the puchase price!
Versa-Tool SB3O Electroplated Diamond Semi-Round Cutting and Grinding Blade For Rockwell Sonicrafter Reviews
Brand:Versa Tool
Offer Price :
See Low Price
Rockwell RW9132 Sonicrafter Sanding Pad Set, Plastic Back, 2-Piece per Pack Reviews
Brand:Rockwell
Model : RW9132
Rating :
List Price :
$14.99 Not Sell on this Price!
Offer Price :
See Low Price
Rockwell RW9132 Sonicrafter Sanding Pad Set, Plastic Back, 2-Piece per Pack Review
A friend borrowed my Rockwell tool and he returned it with one edge of the sanding pad melted off. I'm not sure how he could have possibly done that but here I am buying a new one. Otherwise the part worked as expected. The hook-and-loop system is strong and the sand paper stays put.
Rockwell RW9123 Sonicrafter 1-3/8-Inch Precision End Cut Blade, 1-Piece Reviews
Brand:Rockwell
Model : RW9123
List Price :
$19.99 Not Sell on this Price!
Offer Price :
See Low Price
Bosch PS50-2B 12-Volt Max Multi-X Carpenter Kit Reviews
Brand:Bosch
Model : PS50-2B
Rating :
List Price :
$373.00 Not Sell on this Price!
Offer Price :
See Low Price
Bosch PS50-2B 12-Volt Max Multi-X Carpenter Kit Review
I agonized over whether to go with the cordless Bosch, after all the reviews about its short battery life. But I ended up going for it, and I'm glad I did. The key is what kinds of jobs I use it on.
What I'm finding is that I don't use it for continuous tasks that go on for hours without a break. For me, this is a specialty tool. I use it when my other tools hit their limit--when my random orbit sander won't reach into the corner, or when I need to trim a little off of a window frame, or when my sawzall is too big for a small plunge cut.
So I typically only use this tool for a few minutes at a time, and always with at least 5 or 10 minutes of time between uses--usually much more than that--plenty of time to recharge, especially given that it comes with 2 batteries that are easy to remove.
And I love it being cordless, again because of what I typically use it for. Since I use it when my other tools don't have the precision or finesse, or simply won't fit in the space, it's important that this tool be easy to manipulate, and I really appreciate not having to deal with a cord as I twist into awkward angles and spaces, often on top of a ladder.
Also, since I'm typically using this in conjunction with other tools, it's a real advantage to not have to plug it in each time. For instance, last weekend I was installing some custom windows in a new structure, and I had 3 outlets available, all of which were full with other tools. If my multi-tool were corded, I would have had to unplug something else and plug in the multi-tool each time I needed it. But since it's cordless, I could just pick it up, make the cut, and move on.
(3 Pack) 1 1/4" Coarse Wood Saw Blade -Rockwell SonicrafterTM Reviews
Brand:Imperial
Model : 3RW200
Offer Price :
See Low Price
1 Piece Triangular Carbide Rasp for SoniCrafter, RW9116 Reviews
Brand:Rockwell
Offer Price :
See Low Price
Rockwell RW9122.3 1-3/8" Universal End Cut Blade for Sonicrafter - 3 per Package Reviews
Brand:Rockwell
Offer Price :
See Low Price
Flexible Scraper Blade for Rockwell SonicrafterTM Reviews
Brand:Imperial
Offer Price :
See Low Price
Rockwell RW9123.3 Sonicrafter 1-3/8-Inch Precision End Cut Blade, 3-Piece Reviews
Brand:Rockwell
Model : RW9123.3
Rating :
List Price :
$39.98 Not Sell on this Price!
Offer Price :
See Low Price
Rockwell RW9123.3 Sonicrafter 1-3/8-Inch Precision End Cut Blade, 3-Piece Review
Brought the Precision end cut blade in US and brought it over to india so never knew how this tool and its blades would stand against the hardwood. Used it to Cut Hardwood plywood and Teakwood wooden beam( 1.5 inch X 3 inch X 24 inch Length). Worked perfectly. Only problem i identified was that you need to really tighten the wood to the vice so that the blade can cut thru the wood. If the wood is loose then it will take longer to cut. Best part was even after using it continuously for 15 mins the blades do not get hot.
Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit Reviews
Brand:Rockwell
Model : RK5102K
Rating :
List Price :
$199.99 Not Sell on this Price!
Offer Price :
See Low Price
Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit Review
The product is heavy duty and strong, as advertized, with all the supplied accessories working as promised.
(3 Pack) Diamond Boot Blade for Rockwell SonicrafterTM Reviews
Brand:Diamond
Model : RW730_3
Offer Price :
See Low Price
Rockwell RW9148 Sonicrafter Sanding Finger Pad, Double Side, 1-Piece Reviews
Brand:Rockwell
Model : RW9148
Rating :
List Price :
$14.99 Not Sell on this Price!
Offer Price :
See Low Price
Rockwell RW9135 Sonicrafter 120 Grit Sanding Sheets, 20-Piece Reviews
Brand:Rockwell
Model : RW9135
List Price :
$12.99 Not Sell on this Price!
Offer Price :
See Low Price
1 1/4" Precision Wood Saw Blade - Rockwell SonicrafterTM Reviews
Brand:Imperial
Model : RW100
Offer Price :
See Low Price
Rockwell RW9118.3 2-1/2" HSS Saw Blade for Sonicrafter - 3 per Package Reviews
Brand:Rockwell
Offer Price :
See Low Price
