วันอังคารที่ 31 สิงหาคม พ.ศ. 2553

Rockwell RW9126 Sonicrafter 2-1/2-Inch Carbide Grit Segment saw blade, Thin, 1-Piece

Rockwell RW9126 Sonicrafter 2-1/2-Inch Carbide Grit Segment saw blade, Thin, 1-Piece Reviews

Brand:Rockwell

Model : RW9126

List Price :$24.99 Not Sell on this Price!

Offer Price :See Low Price

วันศุกร์ที่ 27 สิงหาคม พ.ศ. 2553

Rockwell RW9150 Sonicrafter 40 grit Sanding Sheet for Sanding Finger, 20-Piece

Rockwell RW9150 Sonicrafter 40 grit Sanding Sheet for Sanding Finger, 20-Piece Reviews

Brand:Rockwell

Model : RW9150

List Price :$10.99 Not Sell on this Price!

Offer Price :See Low Price

วันพฤหัสบดีที่ 26 สิงหาคม พ.ศ. 2553

Versa-Tool SB1L Triangular Carbide Grinding Rasp For Rockwell Sonicrafter

Versa-Tool SB1L Triangular Carbide Grinding Rasp For Rockwell Sonicrafter Reviews

Offer Price :See Low Price

วันพุธที่ 25 สิงหาคม พ.ศ. 2553

Rockwell RW9144 Sonicrafter 220 Grit Sanding Sheets, 20-Piece

Rockwell RW9144 Sonicrafter 220 Grit Sanding Sheets, 20-Piece Reviews

Brand:Rockwell

Model : RW9144

List Price :$12.99 Not Sell on this Price!

Offer Price :See Low Price

วันจันทร์ที่ 23 สิงหาคม พ.ศ. 2553

Versa-Tool SB3C 1-3/4-Inch Japan Tooth Universal Oscillating Saw Blades For Rockwell Sonicrafter?, 3 Pack

Versa-Tool SB3C 1-3/4-Inch Japan Tooth Universal Oscillating Saw Blades For Rockwell Sonicrafter?, 3 Pack Reviews

Brand:Versa Tool

Rating :

Offer Price :See Low Price

Versa-Tool SB3C 1-3/4-Inch Japan Tooth Universal Oscillating Saw Blades For Rockwell Sonicrafter?, 3 Pack Review

I purchased a set of blades from this vendor at another site, had the opportunity to use them and have found them to be the best bang for the buck as far as quality and durability, let the blade do the work with steady pressure,keeping it from overheating and the blade will last quite a long time.

วันพฤหัสบดีที่ 19 สิงหาคม พ.ศ. 2553

Rockwell RW9119.3 Sonicrafter 3-1/8-Inch HSS Circle Blade, 3-Piece

Rockwell RW9119.3 Sonicrafter 3-1/8-Inch HSS Circle Blade, 3-Piece Reviews

Brand:Rockwell

Model : RW9119.3

Rating :

List Price :$35.98 Not Sell on this Price!

Offer Price :See Low Price

Rockwell RW9119.3 Sonicrafter 3-1/8-Inch HSS Circle Blade, 3-Piece Review

Item as described. Would purchase again. Could be cheaper, but you can say that about everything these days.

วันพุธที่ 18 สิงหาคม พ.ศ. 2553

Rockwell RW9124 Sonicrafter 2-1/2-Inch Carbide Grit Segment saw blade, Standard, 1-Piece

Rockwell RW9124 Sonicrafter 2-1/2-Inch Carbide Grit Segment saw blade, Standard, 1-Piece Reviews

Brand:Rockwell

Model : RW9124

Rating :

List Price :$24.99 Not Sell on this Price!

Offer Price :See Low Price

Rockwell RW9124 Sonicrafter 2-1/2-Inch Carbide Grit Segment saw blade, Standard, 1-Piece Review

I bought the Sonicrafter kit "Rockwell RK5102K Sonicrafter Deluxe 72-pc Kit", and the Carbide Grit Segment saw blade was included as one of the attachments. Unfortunately the thing is made from what can only be described as "a thin bit of tin", and as soon as it touched the first thing I tried to cut, the 'teeth' that connect it to the Sonicrafter shaft rounded off! I thought maybe I hadn't tightened the screw enough so offset it by one tooth and tried again. Basically the metal is so thin that it's not physically possible to really tighten the screw enough to hold this in place, so it rounded the teeth again. So it's for the trash, and I haven't even used it once!

Having said all that, I have successfully used other attachments (which are made of thicker material) to cut through drywall and wood. One of the jobs I bought this for was grout removal, but haven't tried that yet.

I haven't had the problem of the attachments coming loose, but I can imagine that over time that might start to become a problem. A quick release mechanism would have been better, especially if you have a variety of tasks to do in short order, but for now I'm trying to minimize the blade changes in order to avoid wearing out the screw.

วันจันทร์ที่ 16 สิงหาคม พ.ศ. 2553

Rockwell RK5101K SoniCrafter Tool Kit, 37-Piece

Rockwell RK5101K SoniCrafter Tool Kit, 37-Piece Reviews

Brand:Rockwell

Model : RK5101K

Rating :

List Price :$159.99 Not Sell on this Price!

Offer Price :See Low Price

Rockwell RK5101K SoniCrafter Tool Kit, 37-Piece Review

I was preparing to remodel our condo kitchen which is a small galley type kitchen. I had two estimates between 2 & 3 thousand for labor. I had already purchased my floor cabinets, counter tops, sink & faucets, new range & microwave. I have all the basic hand and power tools, so I set out to DIY! I'm glad I did! However I could see I needed one more power tool. I need something like the Fine multitask tool but it cost way to much. I need to trim base boards without removing. Cut out sheet-rock to re-work the plumbing. Also remove some tile, thin-set & grout.

After reading many reviews for my options I decided on the Rockwell SoniCrafter. I could have purchased a Dremel at local home improvement store or a Sears Craftmans cordless version but it had very bad reviews & the Dremel just wasn't heavy duty enough. Bosch has a 12v version also but I just didn't need another battery to keep charged. I had a lot of thin-set & grout to remove.

I purchased the 37pc variable speed kit which came with a heavy duty canvas storage bag. I also ordered an adapter which allows you to use the Dremel blades with the SoniCrafter. This was a well spent 12 bucks! I highly recommend this adapter. When you wear out or break a blade you can go anywhere Dremel is sold and find blades and not have to wait to order them from Rockwell.

I received my SoniCrafter in only four days with free super saver shipping, thank you Amazon! I was very surprised how heavy duty this tool is. This is a serious power tool! It also comes with a roomy plastic case to store all your accessories. The hex key to install & remove the blades stores conveniently with a holder on the power cord.

Some of the reviews stated the blades were coming lose during use. If the blades are properly installed there is know way they will loosen during use. Unlike what you might think, the tool runs very smooth & does not vibrate in your hand and is easy to control even at the highest speed. I had my wife using it with the carbide blade to remove grout between tiles & she had no problem at all controlling it.

Bottom line: If you are handy around your home this is a must have power-tool. I paid under 0 for mine & It paid for itself the first time I turned it on! This one tool saved me much time & effort with my kitchen remodel. A small kitchen renovation is very doable yourself with very basic tools. If I can do it anyone can! The only thing I did not do was the plumbing! Our next project will be installing the back splash which will save me another 0! With all my savings on labor alone I have purchased new oak stair treads for my stairs and wood flooring for the upstairs bedrooms!